|
Today’s chromatography and its development is not
driven so much by university research anymore, but the needs of the
modern analytical routine industry lab.
HTS techniques, Proteomics, Genomics and other
newer developments in industrial routine research have led to a
minimalisiation of sample size, reduction of analysis time and higher
expectations on instrumentation as well as accessories.
As an answer to these demands VICI Jour has in
cooperation with the VICI Valco group developed the PEEK Nanovolume™
Fittings for use with 1/32" PEEK tubing (see page 7) and fused
silica transfer lines and/or columns.
The VICI Jour Nanovolume™ Fittings are as easy
to handle as our standard analytical fittings and unions. The only
difference is their size.
Nanovolume
Connectors |
Part
No. |
Description |
C-NERU1FPK |
Union,
PEEK, 150 µm bore, Reducing, Int. 1/32" - Ext.1/16" |
C-NEU.5XFPK |
Union,
PEEK, 100 µm bore, Int. 1/32" - Ext. 1/32" ZDVF |
C-NEU.5FPK |
Union,
PEEK, 150 µm bore, Int. 1/32" - Ext. 1/32" ZDVF |
C-NEU.5XFPK.35 |
Union,
PEEK, 100 µm bore, Int. 1/32" - Ext. 1/32" ZDVF,
complete with Liners for tubing OD 325 - 375 µm |
C-NEU.5FPK.35 |
Union,
PEEK, 150 µm bore, Int. 1/32" - Ext. 1/32" ZDVF,
complete with Liners for tubing OD 325 - 375 µm |
C-NTXFPK |
Tee,
PEEK, HP 100 µm bore, complete, 1/32" |
C-NTFPK |
Tee,
PEEK, HP 150 µm bore, complete, 1/32" |
C-NXXFPK |
Cross,
PEEK, 100 µm bore ID, complete, 1/32" |
C-NXFPK |
Cross,
PEEK, HP 150 µm bore, complete, 1/32" |
C-NYXFPK |
Y,
PEEK, HP 100 µm bore, complete, 1/32" |
C-NYFPK |
Y,
PEEK, HP 150 µm bore, complete, 1/32" |
|
Nanovolume
nuts & ferrules |
Part
No. |
Description |
C-NNFLFPK |
Fitting,
PEEK, one-piece long, grooved ferrule, 1/32" |
C-NNFFPK |
Fitting,
PEEK, one-piece short, grooved ferrule, 1/32" |
C-EN.5FPKB |
Nut,
PEEK, External, 1/32" |
ZGF.5PK |
Ferrule,
PEEK, grooved, 1/32" |
EN1FPKB |
Nut,
PEEK, External, 1/16" |
ZGF1PK |
Ferrule,
PEEK, grooved, 1/16" |
SPECS: |
Material: |
PEEK |
Thread
size: |
6-40
UNF |
Tolerances: |
+/-
0.05 mm (.002") |
|
Liners
for fused silica tubing connections * |
Part
No. |
Description |
Liners
for tubing |
OD
325 - 375 µm |
C-NL.35S |
Liner,
PEEK, .031" OD x .015" ID x .400" lentgh (for use
with Nut P/N C-EN.5FPKB) |
C-NL.35L |
Liner,
PEEK, .031" OD x .015" ID x .825" length (for use
with Nut P/N C-NNFFPK) |
C-NL.35XL |
Liner,
PEEK, .031" OD x .015" ID x 1.075" length (for use
with Nut P/N C-NNFFLFPK) |
C-NLS2.35 |
Liner,
PEEK, with 2 µm Screen, 0.031" OD x 0.015" ID x 1"
length |
*
Liners are available for fused silica OD:
125 - 175 µm, 225 - 275 µm, 275 - 325 µm, 325 - 375 µm |
|