Flanschlose farbige Delrin Schrauben
 
Delrin Color Coded Flangeless Fingertight Nuts
VICI Jour takes the flange out of plastic tube nuts. Merely slip the nut and ferrule on to Teflon or Tefzel tubing and finger-tighten into any standard 1/4"-28 threaded flat bottom fitting detail. Six different colors allow you to color code your solvent streams e.g. in a gradient system.
 
Here is the system which provides a zero dead-volume, leak-free seal without flanging. For higher pressures use the Tefzel tubing. The ferrule is made of Tefzel - a highly inert fluorocarbon polymer - and is the only part, besides the tubing, which is in contact with the fluid - the nut is never in contact with the fluid stream. We do not recommend Delrin nuts to be used with acids or bases.
Delrin Color Coded Flangeless Fingertight Nuts 1/16"
Part No. Description
040 Green Nut, Delrin, flangeless 1/16", green, 1/4"-28
040 Blue Nut, Delrin, flangeless 1/16", blue, 1/4"-28
040 Yellow Nut, Delrin, flangeless 1/16", yellow, 1/4"-28
040 Red Nut, Delrin, flangeless 1/16", red, 1/4"-28
040 White Nut, Delrin, flangeless 1/16", white, 1/4"-28
040 Black Nut, Delrin, flangeless 1/16" black, 1/4"-28
040 White Long Nut, Delrin, flangeless 1/16" for Dionex 1" long, white, 1/4"-28
041 Ferrule, Tefzel, 1/16"
 
Delrin Color Coded Flangeless Fingertight Nuts 1/8"
Part No. Description
050 Green Nut, Delrin, flangeless 1/8" green, 1/4"-28
050 Blue Nut, Delrin, flangeless 1/8", blue, 1/4"-28
050 Yellow Nut, Delrin, flangeless 1/8", yellow, 1/4"-28
050 Red Nut, Delrin, flangeless 1/8" red, 1/4"-28
050 White Nut, Delrin, flangeless 1/8" white, 1/4"-28
050 Black Nut, Delrin, flangeless 1/8" black, 1/4"-28
050 White Long Nut, Delrin, flangeless 1/8" for Dionex 1" long, white, 1/4"-28
050 Black Long Nut, Delrin, flangeless 1/8" for Dionex 1" long, black, 1/4"-28
051 Ferrule, Tefzel, 1/8"
 SPECS:
 Material: Delrin
Ferrule = see chart
 Dimensions: For OD 1/16" and 1/8" Tubing
 Tolerances: +/- 0.05 mm (.002")
 Pressure rating: 1/16" fitting 70 bar (1000 psi),
1/8" fitting 35 bar (500 psi)
 Special Info: Assembles in seconds without Tools
 Special Info: Assembles in seconds without Tools
Compatible with any 1/4"-28 Fitting System
Use with 1/16" or 1/8" OD Tubing